We are an Australian company based in Melbourne, Victoria.
Yes, we sell to most countries outside of Australia.
All our prices are in USD however, customers can easily convert pricing on our website using our currency conversion calculator. Whilst customers can see our pricing in their local currency, prices will be converted back to USA Currency (USD) at checkout.
We offer a flat rate of $7.99 USD for domestic shipping within Australia.
We also offer free domestic shipping on qualifying orders. To find out more about our shipping rates and policy, please click here.
We offer flat rate pricing for international shipping. Shipping costs range from $7.99 USD to $28.99 USD depending on which country you are shipping to, and how much you spend per order.
We also offer free international shipping on qualifying orders. To find out more about our shipping rates and policy, please click here.
Customers outside of Australia may be subject to import taxes and customs duties (VAT) levied by your local customs office, once the order reaches the destination country.
These additional additional fees for customs clearance must be fulfilled by the recipient; Light My Bricks has no control over these charges, nor can we predict what they may be.
Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it may cause delays beyond our control.
Light My Bricks offer set specific LEGO lighting kits, with detailed, easy to follow user guides. This means LEGO fans of all types can light up their favourite LEGO sets.
We're constantly releasing new sets to update our ever growing list of lighting kits. But if you don't see your set, you can recommend it to us on our Suggest A LEGO Setpage.
Another big difference is the ability to connect multiple kits via a single power source. This is an important feature for those with multiple LEGO sets or elaborate creations.
Light My Bricks offer multiple lighting options. Our lights can be battery powered using either standard AA batteries or using flat CR2032 batteries. We also stock USB power cables which can be plugged into a USB power bank to power up your models.
All of our lighting products run on 5 volts.
All of our lights are LED lights and do not draw any form of heat. Our products are designed to run continuously.
Our products are safe for children over 4 to use however, adult supervision is required as our parts are very small and may be tricky for children to connect.
The running time for our lights depends on the battery pack and the number of lights connected.
The more lights connected, the more power it draws, and therefore will not run as long as compared to a kit with fewer lights. As time goes on, the lights will slowly become dimmer as the batteries grow weaker.
Our USB option, however, can run as long as the USB power bank allows or even continuous if connected to a USB adaptor that plugs into a power main.
As a guide, our Police Car Starter Kit (6-Lights + Round/Flat Battery Pack) will run approximately 6 hours before starting to dim and then eventually stop powering after 12 hours.
Compared to a kit like the Ghostbusters Ecto 1 (18-Lights + Flat Battery Pack) will run for approximately 4 hours before dimming and then eventually stop after 8 hours.
AA Battery Packs last longer than Flat/Round Battery Packs
Yes, of course! This is one of Light My Bricks main features.
Simply swap out the battery packs with connecting cables. Then connect the connecting cables to an expansion board. Next, connect the expansion board to a USB Power Cable and select your power source (Power Bank or Power Adaptor).
Although there are no limitations to how many lights you wish to power off a single source, we recommend using around 8 light kits per single power source. This will provide you with optimal brightness from your lights.
The more lights added to a single power source will result in a decrease in the level of brightness. This is because of the increased power required to illuminate the lights.
While LEDs are designed to last for a very long time (rated life of up to 50,000 hours and over), extra care must be taken to ensure they are well looked after and powered correctly. Aside from powering using our 4.5-5V battery packs, our LEDs can be powered using mains power via our USB power cables connected to the correct power adaptor.
Our components all run on a very low voltage of 5V, so it is essential to use appropriate power adaptors. As a guide, look for a power adaptor with a rating output of no more than 4 Amps. Do not use an adaptor that has an output more than 4amps. Be very careful of using aftermarket universal adaptors as quite often these "cheaper" adaptors do not output stable current. Electronic spikes can dramatically shorten the life of our LEDs and can also result in them burning out or becoming very dim. Using an incorrect power adaptor will void the warranty of your product.
Another important thing to note when powering our lights over mains power is to give the lights rest. Like any type of light or LED, powering them 24 hours a day, 7 days a week will also shorten the life of them. If you wish to run them all day, it is beneficial to give them a rest each day by powering the mains power completely off.
Yes, we also cater to DIY LEGO fans!
We stock a wide range of individual lights, expansion boards, connecting cables, effects boards, and power sources to light your LEGO creations.
Our Light My Bricks design team are constantly working on the next LEGO® set to light up. You can stay in touch via Facebook, Instagram or follow our blog to stay up to date with the latest light kits being designed.
We also have a Suggest A LEGO Set page where we take recommendations for what our next kit should be.
The last thing we want for our customers is a bad experience with a faulty kit.
We're always releasing new kits on a frequent basis, but the best way to be informed of our product updates is to subscribe to our email newsletter or follow us on social media:
Alternatively, you can subscribe to our blog via RSS feed for the latest news.
Depending on the order size, we're more than happy to discuss incentives for larger orders. Please get in touch via the Contact Us page to discuss your order.